2" EXHAUST CATBACK TURBO ELECTRIC E CUTOUT VER 2 With REMOTE UNIVERSAL PERFORMANCE For Jeep Wrangler TK-CUTNEW20

TANSKY - 2" EXHAUST CATBACK TURBO ELECTRIC E CUTOUT VER 2 With REMOTE UNIVERSAL PERFORMANCE For Jeep Wrangler TK-CUTNEW20

Project Univeral 2" Electric EXhaust Y-Pipe Cutout Valve W/ Remote

Kit includes:

-electric 2" exhaust cut out

-wireless remote / switch button

-sus304 11" y-adaptor

-10ft wire harness

-built-in motor

This exhaust cut out is made to enhance the performance and sound of your vehicle with the touch of a button. You can weld this 2" exhaust cutout anywhere after the header of the vehicle. To open the cutout you simply flip the which and it will open your exhaust for a throatly rumble exhaust note. If the vehicle is runs dual exhaust , please keep in mind that you will need two exhaust cut out.

Note: this is a d.i.y ( do it yourself ) kit , please keep in mind that you will have to weld this to your factory / aftermarket exhaust . also please check to make sure your factory / aftermarket exhaust is also 2" inch.

Our Store offer different sizes and Types for Electric Exhaust Cutout Valve .

Please click the size Parts NO. that you need .

Exhaust Remote Control Valve Motor	Size	Parts NO.
	Universal	TK-CUT01GDJ

Exhaust E-CUTOUT Y PIPE With Dual Valve	Size	Parts NO.
	2.25 2.5" / 3" etc	TK-CUT007Y

Exhaust E-CUTOUT I PIPE	Size	Parts NO.
	ID:2.0"	TK-CUT01G20
	ID:2.25"	TK-CUT01G225
	ID:2.5"	TK-CUT01G25
	ID:2.75"	TK-CUT01G275
	ID:3.0"	TK-CUT01G30
	ID:3.5 4.0"	TK-CUT01G

Exhaust E-CUTOUT Y PIPE	Size	Parts NO.
	ID:2.0"	TK-CUTNEW20
	ID:2.25"	TK-CUTNEW225
	ID:2.5"	TK-CUTNEW25
	ID:2.75"	TK-CUTNEW275
	ID:3.0"	TK-CUTNEW30

All items are Brand unless stated otherwise on the listing. We sell DIY (Do It Yourself) Items with a few exceptions.

We take no responsibility in teaching you how to install. Professional installation is strongly recommended.

Specifications
2\" Exhaust Downpipe Testpipe Catback	Yes
Controlled Exhaust Valves Outflow	Wireless Remote
Country/Region of Car Manufacture	CHINA
Exhaust Pipes Material	T-304 Stainless Steel Interchange
Exhaust Typer	Y Exhaust Cutout Pipe
Inlet/ Major Piping Diameters	2\
Interchange Part Number	N/M
ITEM NAME	Electric Exhaust Cutout cut out Y Type
Manufacturer Part Number	TK-CUTNEW20
Mounting Position	Medium
Other Part Number	N/M
Replace NAME	DOWN MIDDLE AXLE PIPE BACK MUFFLER
Special Features	Universal
Vehicle Make	Universal
Y Type Exhaust Catback Header DUMPS Pipe	Yes
Specifications for this item
Type	Dissipative Muffler
Brand Name	TANSKY
Material Type	Stainless Steel
Processor
Description	Electric Exhaust Muffler Valve Cutout System

Write a review

Your Name

Rating

    Bad           Good

Your Review

Note: HTML is not translated!

Continue