Availability: In Stock
iFJF R12T Fuel/ Water Separator Filter diesel engine for Racor 140R 120AT S3240 NPT ZG1/4-19 Automotive Parts Complete Combo
Product Code: WCP-1891
$59.99
Free Shipping
Ship from the USA warehouse, usually 3-7 weekdays will arrive, some times need 7-20 weekdays or more.
Ask About This Product

Diesel engine fuel filter water separator filters for Racor R12T 120AT replacement truck automotive filters Complete Combo

For R12T Marine Fuel Filter / Water Separator complete assembly.NPT,ZG1/4-19.

The filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance.

This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water.Tighten the valve, the water will not discharge. Release the valve, the water can be free to discharge.

Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel.

Specification:
1.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
2.Maximum Flow Rate 30 GPH (57 LPH).
3.Port / Connecting Size M18 X 1.5 Center Thread.
4.These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.

Note: Please recognize the IFJF brand as the quality assurance of the platform certification

R12T water separator and filter complete combo installation instruction:

1.Nylon collection bowl down when installed the water separator and filter.

2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.

3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.

4.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.

Categories: Solvent Trap
Specifications
Country/Region of Manufacture CN
Interchange Part Number 120AT
Item Height 16CM
Item Length 8CM
Item Width 8.5CM
Manufacturer Part Number XL-F-R12T-NEW
Origin CN(Origin)
Other Part Number Racor 120AT
Placement on Vehicle Fuel Inlet
Special Features fuel water separator
Specifications for this item
Brand Name iFJF
Item Weight 580g
Material Type Aluminum
Categories: Solvent Trap

Write a review

Note: HTML is not translated!